Prego cliccare sul codice blu sottostante per aprire il dettaglio dell'attacco:
Air rifle / Rimfire rifle Low Range to suit 1" dia. scopes upto 32mm lens dia and 9.5 - 11.5mm dovetails
LTO30C - Two piece single screw mounts with removable arrestor pin. A = 13mm - B = 16mm
LTO31C - Two piece double screw mounts with removable arrestor pin. A = 13mm - B = 21mm
LOP32C - One piece single screw mount with removable arrestor pin. A = 13mm - B = 110mm
LOP33C - One piece double screw mount with removable arrestor pin. A = 13mm - B = 110mm
Air rifle / Rimfire rifle Medium Range to suit 1" dia. scopes up to 45mm lens dia and 9.5 - 11.5mm dovetails
TO1C - Two piece single screw mounts. A = 17mm - B = 16mm.
TO2C - Two piece single screw mounts with removable arrestor pin. A = 17mm - B = 16mm.
TO3C - Two piece double screw mounts. A = 17mm - B = 21mm.
TO3C SPECIAL - Two piece double screw mounts with a hardened cross pin to suit recoil arrestor grooves on various Webley e.g. Patriot, FWB Sport etc. A = 17mm - B = 21mm.
TO4C - Two piece double screw mounts with removable arrestor pin. A = 17mm - B = 21mm.
TO6C 13 mm - Two piece double screw mount with removable arrestor pin specially for 11-13 mm dovetails including early Weihrauch HW35 and most modern BSA air rifles. A = 17mm - B = 21mm
ETO9C - Two piece double screw extended mounts, long front mount (46 mm) giving 25 mm extension to scope mounting points with removable arrestor pin. A = 17mm - B = 21mm.
OP1OC - One piece single screw mounts with removable arrestor pin. A = 17mm - B = 120mm.
OP12C - One piece single screw special mount with body cut away to 85 mm and one ring moved 10 mm to allow scope to be mounted 35 mm further forward or rearward than standard mounts. Especially suitable for some early BSA air rifles and rifles with eye relief problems. A = 17mm - B = 120mm.
OP14C - One piece single screw mount with base cut out to clear action on bolt action rifles. Suitable for sharp Innova and Ace rifles. A = 17mm - B = 120mm
OP15C - One piece single screw angled mount with 0.75mm of vertical taper machined into the body. Particularly usefull when the elevation adjustment on the scope is not sufficient and with air rifles with drooping barrels. Includes removable arrestor pin. A = 17mm - B = 120mm.
OP22C - One piece single screw mount with a hardened cross pin to suit recoil arrestor grooves on various Webley e.g. Patriot, FWB Sport etc. A = 17mm - B = 120mm
OP25C - One piece double screw mount with removable arrestor pin A = 17mm - B = 120mm
OP43C - One piece double screw mount specially designed to suit falcon and other pre-charged air rifles, also suitable for certain combination guns with around 10m dovetails. A = 17mm - B = 100mm
Air rifle / Rimfire rifle High Range to suit 1" dia. scopes up to 56mm lens dia and 9.5 - 11.5mm dovetails
AOP55 One Piece Double screw mount adjustable for windage and elevation. Suitable for all spring guns / semi auto.22 rimfire rifles. Suitable for some pre-charged pneumatic air rifles such as BSA SuperTen and Weihrauch HW100. The maximum amount of adjustment is 2mm from one end of the mount to the other. This applies to the windage and elevation. N.B. Will clear 60mm objective lens dia. on most rifles. Includes removable arrestor pin A = 26.5mm - B = 110mm
ATP65 Two Piece double screw mount adjustable for windage, elevation and height. The ATP65 can also be adjusted laterally so scopes can be perfectly centred with dovetails. The adjuster screws have a special anti vibration coating to ensure no loss of zero and easily withstand F.A.C rated spring air rifle recoil. Will clear 60mm lens dia. scopes on most rifles. A = 26.5 - 29mm B = 21mm
DM60 Dampa Mount - One piece double screw mount (up to 50mm lens dia. without external parallax ring). Rubber bushes prevent scope damage. A = 22mm - B = 110mm
HT07C - Two piece double screw mounts A = 24mm - B = 21mm
HT08C - Two piece double screw mounts with removable arrestor pin. A = 24mm - B = 21mm
HT08C 13 mm - Two piece double screw mounts with removable arrestor pin specially for 11-13mm dovetails including early Weihrauch HW35 and most modern BSA air rifles. A=24mm - B=21mm
HST46C 'See Thru' - Two piece double screw mounts 'see thru' design allows use of iron sights as well as telescopic sights with up to 40mm lens dia. A = 29mm - B = 21mm
HOP16C - One piece single screw mount with removable arrestor pin. A = 24mm - B = 120mm
HOP17C - One piece single screw mount with body cut away to 85 mm and one ring moved 10 mm to allow scope to be mounted 35 mm further forward or rearward than with standard mounts. Especially suitable for some early BSA air rifles and rifles with eye relief problems. A = 24mm - B = 120mm
HOP18C - One piece single screw mount with base cut out to clear action on bolt action rifles. Suitable for sharp Innova and Ace rifles. A = 24mm - B = 120mm
HOP19C - One piece single screw angled mount with 0.75mm of vertical taper machined into the body. Particularly usefull when the elevation adjustment on the scope is not sufficient and with air rifles with drooping barrels. Includes removable arrestor pin. A = 24mm - B = 120mm
HOP23C - One piece single screw mount with a hardened cross pin to suit recoil arrestor grooves on various Webley e.g. Patriot, FWB Sport etc. A = 24mm - B = 120mm
HOP26C - One piece double screw mount with removable arrestor pin. A = 24mm - B = 120mm
HETO42C - Two piece double screw extended mounts. Long front mount (46 mm) giving 25 mm extension to scope mounting points with removable arrestor pin. A = 24mm - B = 21mm
HETO58C - Angled Two Piece Extended. Two piece double screw extended mounts with 0.4mm of vertical angle. Complete with removable arrestor pin A=24mm B=21mm
Air rifle / Rimfire rifle Medium Range to suit 30mm dia. scopes up to 44mm lens dia and 9.5 - 11.5mm dovetails
TO35C - Two piece double screw mounts with removable arrestor pin. A = 15mm - B = 21mm
ET037C - Two piece double screw extended mounts. Long front mount (46 mm) giving 25 mm extension to scope mounting points with removable arrestor pin. A = 15mm - B = 21mm
OP39C - One piece double screw mount with removable arrestor pin. A = 15mm - B = 120mm
OP44 – One Piece Double Screw Reach Forward / Back Mount. Ideal for certain combination guns. A= 15mm B=100mm
Air rifle / Rimfire rifle High range to suit 30mm dia. scopes up to 56mm lens dia. and 9.5 - 11.5mm dovetails
HT036C - Two piece double screw mounts with removable arrestor pin. A = 21mm - B = 21mm
HT036C 13 mm - Two piece double screw mounts with removable arrestor pin specially for 11-13mm dovetails including early Weihrauch HW35 and most modern BSA air rifles. A=21mm B=21mm
HET038C - Two piece double screw extended mounts. Long front mount (46 mm) giving 25 mm extension to scope mounting points with removable arrestor pin. A = 21mm - B = 21mm
HOP40C - One piece double screw mount with removable arrestor pin. A = 21mm - B = 120mm
ATP61 - Adjustable elevation and extra high two piece 30mm mount includes removable arrestor pin * Suitable for up to 60 mm lens dia. scopes on most rifles A = 22.5 - 23.8mm B = 21mm
ATP66 Two Piece double screw mount adjustable for windage, elevation and height. The ATP66 can also be adjusted laterally so scopes can be perfectly centred with dovetails. The adjuster screws have a special anti vibration coating to ensure no loss of zero and easily withstand F.A.C rated spring air rifle recoil. Will clear 60mm lens dia. scopes on most rifles. A = 25 - 27.5mm B = 21mm
DM70 - Dampa Mount - One piece double screw mount. Rubber bushes prevent scope damage. A=23mm B=110mm
Tikka / CZ Medium range to suit 1" dia. scopes up to 45mm lens dia. and 15mm and 17mm dovetails
TO48C - Two piece double screw mounts with removable steel arrestor pin. Especially suitable for Tikka and other 15mm dovetails including early Brno Model 2 .22lr B/A rifle A = 15mm - B = 21mm
TO49C - Two piece double screw mounts with removable steel recoil arrestor pin. Especially suitable for CZ / Brno 15 mm (small action) dovetails including the CZ527 / Fox A = 15mm - B = 21mm
T050C - Two piece double screw mounts with removable steel recoil arrestor pin. Especially suitable for CZ / Brno 17 mm (large action) dovetails including the CZ550 and ZKK600/601/602. Also fits appropriate Parker Hale bases. A = 15mm - B = 21mm
Weaver / Picatinny Medium range to suit 1" dia scopes upto 50mm lens diameter.
TO54C - Two piece double screw mounts with high tensile steel recoil arrestor bolt to suit all Weaver / Picatinny rails. A = 16mm - B = 21mm
Weaver / Picatinny High range to suit 30mm dia. scopes upto 56mm lens diameter
HTO67C - Two piece double screw mounts with square section high tensile arrestor bolt to suit all Weaver / Picatinny rails. A = 21mm B=21mm
HETO68C - Two piece double screw extended mounts. The long front mount (46mm) gives 25mm extension to scope mounting points. Suits all Weaver / Picatinny rails. Includes square section high tensile arrestor bolt. A=21mm B=21mm
Sportsmatch Scope Mount Accessories
SP1 - Spirit level kit. Fits all 1" mounts manufactured by Sportsmatch.
SP2 - Spirit level kit. Fits all 30mm mounts manufactured by Sportsmatch.
SP3 - Swing out spirit level kit. Fits all 1" and 30mm mounts manufactured by Sportsmatch.
SP4 - Side mounted spirit level kit. Fits all Sportsmatch mounts with M5 side clamp screws. Designed to be visible without moving eye away from scope.
AB3 - Raising rail / arrestor block suitable for guns / mounts with 9.5mm - 11.5mm dovetail fitting with removable arrestor pin. A (Overall Height) = 16mm B = 21mm
RB4 - 15mm - 9.5mm dovetail adapter rail. Allows any 1" or 30mm scope to be fitted to Tikka and CZ527 / Fox rifles. Any of our rimfire / air rifle mounts can be fitted to this rail. A = 15mm (Overall Height) B=21mm
RB5 - 9.5mm - Weaver / Picatinny adapter rail. Converts most air rifle and rimfire dovetails to Weaver / Picatinny allowing night sights, range finding scopes etc. to be fitted. Allows loading on most precharged air rifles. Quick and easy to remove allowing rapid fitting of daytime scope. Includes removable arrestor pin. A = 19mm (overall height) B = 21mm
Callister Srl